(Sorry for posting on the installment plan; seems to be a new restriction.)
Still racing in the Columbus Day Cruising Regatta, as I have been since 1977. Missed a race, no thanks to Hurricane Andrew and another due to Hurricane Irma, and in 2020 I missed the CDCR, because I had my boat in pieces strewn about the garage, carport and attic; taken apart like a cheap watch, while I re-painted and refurbished her.
Otherwise, I've been there.
When I first started, it was strictly limited to the first 750 entries. But hurricanes, changing times, changing interests, and aging-out of the traditionalists have all conspired to reduce this year's field to 33 boats.
Figured I was a shoo-in for a prize since they award three to each division and there were only 3 registered in my class: Gunkhole.
Then, a fourth person entered in Gunkhole class and now it was a race! :)
Forgot ONE little detail: You have to be able to finish the race.
I didn't know that when I left Gainesville early Friday morning (well, early for the "noon"balloon", anyway).
Stopped at the flagship West Marine in Fort Lauderdale on my way down.
Been having trouble with my centerboard winch cable. Seems, I had used too small a diameter cable.
While sufficient in terms of strength, it took forever to crank the winch enough for the finer wire to wind around the winch axle and the strands continually crossed over each other and jammed.
Most of the WM stores up here in north central Florida don't even have a customer sail rigging area, like the Ft. Lauderdale store has.
My first problem was parking the rig.
WHAT kind of Brain Dead Architect, designs a marine store that doesn't accommodate people towing oh, I don't know, BOATS!?!??
How to chew up 6 parking spaces:
20231006_133918 1024X768.jpg
When all you would have to do is to remove opposing parking curb stops on one of the parking sections.
Not an overly tough concept, huh, fellas?
20231006_133922 1024X768.jpg
Nor was I the only boater to face this challenge.
20231006_134048 1024X768.jpg
THEN, when I got there, I found the rigging department had two cable sizes: too big and too small.
Instead, I bought a closed thimble and some Dyneema line in a large enough diameter to resolve my centerboard winch cable issues.
Then I hied me down to Crandon Marina, where the October King Tides were on full display.
20231006_162322 1024X768.jpg
Part of the docks were under water, so I knew I was going to have to wait until the tide went out a little in order to safely launch Urchin.
20231006_162340 1024X768.jpg
Here is where I parked.
20231006_163322 1024X768.jpg
Very close to the launch ramp.
As you can see, a few more years of rising sea-water levels and you can both launch and park, without even moving the tow rig!!
20231006_163354 1024X768.jpg
Admiring my recent modification whereby my boom vang gets temporarily re-purposed to aid in a Septuagenarian continuing to step a mast that posed no challenges whatever, back in his 20's.
20231006_175410 1024X768.jpg
Part 2 coming up.
Charles Brennan